Click To Call(386) 272-6727Click To Get A Free Estimate
Red brick paver walkway edged with ferns leading up to the front step of a Deltona ranch home

Warm brick color that stays put in the Florida sun

Brick Paver Sealing in Deltona, FL

Request a free brick paver sealing estimate in Deltona by calling (386) 272-6727 now.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(386) 272-6727

Is brick paver sealing available in Deltona right now?

Brick paver sealing is available in Deltona, and a local contractor answers every estimate request within 1 business day, usually much sooner. The visit costs nothing, and you can say no after hearing the price. To get started, call (386) 272-6727.

Brick pavers carry a warmth that concrete does not, which is why a dull, green or faded brick walk stands out. Dirt settles into the surface, algae grows where it stays damp and sand leaves the joints. A seal chosen for brick deepens the color again and slows all of that. Tell the contractor if your brick is old, new or patched, then request your free estimate.

Call (386) 272-6727

Aged brick pavers laid in a basket pattern on a patio beside a stucco wall and potted palms

Does brick need a different sealer than concrete pavers?

Why does the product matter for brick?

Unilock says brick and natural stone absorb sealer at different rates, and that a sealer designed for concrete pavers may not suit every material. A coat that soaks in unevenly can leave blotches. Ask for the product name and why it fits brick. To put that question to a contractor, call (386) 272-6727.

Is water-based sealer the right choice for brick?

Florida companies lean that way. One says water-based is the standard because it lets moisture escape, where solvent can turn white and peel in humidity. Another says concrete, stone and brick pavers can all be sealed. Ask what goes on your brick and request your free estimate.

Why ask for a test corner first?

Unilock says to test a small corner before sealing, since the same coat can look different on different materials. A test corner shows how your brick takes the product before the whole area is done. Describe the color and age of your brick when you call (386) 272-6727.

Which finish suits brick pavers, natural or wet look?

What does a natural finish do?

Unilock says a natural look stays close to how the surface looked unsealed. On older brick that keeps the faded, earthy tone while still protecting it. To see a sample, request your free estimate.

What does a wet look do?

It deepens the color and may add gloss, per Unilock. A glossy coat can turn slippery when wet, and a Florida company says matte finishes generally last longer than glossy ones. For help weighing those, call (386) 272-6727.

Which finish suits steps and walks?

Unilock says a penetrating matte keeps traction. Brick steps shaded by oaks stay damp longer than a sunny walk, so footing counts for more than shine there. Mention the steps when you request your free estimate.

Pricing

What does brick paver sealing cost in Deltona?

An Orlando paver company lists clean, sand and seal for brick pavers at $1.50 to $3.00 per square foot, with typical projects at $750 to $3,000. That matches the Central Florida range other companies publish. For a price on your own brick, request your free estimate.

Cleaning alone costs less, at $0.15 to $0.75 per square foot per the same company. Stripping failed sealer and resealing costs more, at $3.50 to $5.00 per square foot over two to three days, and a Central Florida company says removing a failed coat can add $500 to $1,000 or more to a quote. Natural stone is priced higher, at $2.00 to $3.50. To weigh a bid you already hold, call (386) 272-6727.

The table below applies the published brick range. For washing without a coat, read paver cleaning and joint sand. The service areas and the home page are one click away.

Paved areaTypical exampleAt $1.50 to $3.00 per sq ft
300 sq ftBrick walkway or entry$450 to $900
500 sq ftBrick patio$750 to $1,500
800 sq ftBrick driveway$1,200 to $2,400
1,000 sq ftBrick drive with a walk$1,500 to $3,000

The math multiplies the $1.50 to $3.00 per square foot that an Orlando paver company lists for clean, sand and seal on brick pavers, with typical projects at $750 to $3,000 on that page. That company puts stripping failed sealer and resealing at $3.50 to $5.00 per square foot over two to three days. Natural stone is listed higher, at $2.00 to $3.50. A Central Florida company sets a $1,000 minimum and says removing a failed coat adds $500 to $1,000 or more. Your contractor prices the brick after seeing it.

Get a Free Estimate

Gloved contractor with a long handled sprayer working along a brick border next to a paver driveway
How it works

What is the brick paver sealing process, step by step?

Brick calls for a gentle hand, so the process leans on low pressure and patience. These six steps are the usual order. To hear how a contractor would run it at your house, call (386) 272-6727.

1. Look it over

Loose bricks, old sealer, moss and rust marks near planters are noted before a price is set.

2. Treat growth

An algaecide goes on, since dirt, mold and mildew have to be removed before sealant, per a Florida company.

3. Wash gently

Unilock suggests a fanned nozzle at about 30 degrees and about 12 inches away, with no wire brushes that leave rust.

4. Sand the joints

Joint sand is swept in and wet down so the brick stays locked.

5. Dry fully

About 24 hours in shade, a few hours in sun, per Unilock.

6. Seal and walk it

A sprayer lays the coat, a dry roller evens it and the contractor walks the job with you.

Can I seal brick that has turned green or white?

What about green growth on brick?

Algae thrives where brick stays damp, and a company that lists Deltona names mold and algae in shaded areas as common here. It is treated and washed off first. Sealing over it would trap it. To have the damp spots looked at, call (386) 272-6727.

What is the white haze?

Unilock describes efflorescence, a white haze that usually clears in two to three months on new pavers, and a separate whitish film that comes from trapped moisture, over-application or sealing over an incompatible earlier product. Point it out when you request your free estimate, and expect a test corner first.

Is a peeling old coat a problem?

Yes. A peeling coat has to come off before a new one goes down, and that is the strip and reseal priced at $3.50 to $5.00 per square foot by an Orlando company. Tell the contractor when the last coat went on, and call (386) 272-6727.

How long does a sealed brick surface last in Deltona?

An Orlando paver company says a coat lasts two to four years, with a maintenance cleaning every 12 to 15 months. Unilock reports that owners commonly reapply at three to five years. Brick in full sun and heavy traffic belongs at the short end, and brick in shade at the long end. To schedule a check, call (386) 272-6727.

Wikipedia puts Deltona in a humid subtropical climate with 51 to 53 inches of rain a year. A coat that sits wet most of the summer wears faster than one that dries. A cleaning each year keeps growth off the surface. To plan the cleaning visit, request your free estimate.

How do Deltona homes and weather affect brick?

What do the older homes mean for brick?

A brokerage page describes Deltona Lakes as mostly 1960s to 1980s concrete block homes on quarter to half acre lots. A brick walk or border that old has weathered decades of Florida seasons and may have sunk in places. A contractor can point that out before sealing. To ask for a look, call (386) 272-6727.

What does Deltona weather do to brick?

Wikipedia lists June through September as the wettest months and Hurricane Charley's eye over the city in 2004. Storms pull sand from joints and flood low yards. Brick that has dried out is ready for sealer, and a contractor can wait for it. To plan around storms, request your free estimate.

Are lakes and shade a factor?

The city is about 8.5 percent water per Wikipedia, and a brokerage page notes mature oak and pine canopy. Shade and lake air keep brick damp longer, which feeds algae. To discuss shaded brick, call (386) 272-6727.

Photos

What do sealed brick pavers look like around Deltona?

Sealed paver driveway and front porch of a block ranch home with an older couple on the steps on Deltona brick pavers
Family by a sealed paver pool deck in a screened lanai on Deltona brick pavers
Sealed paver walkway to a ranch home front door lined with ferns and crepe myrtles on Deltona brick pavers
Sealed paver covered lanai with a ceiling fan beside a screened pool on Deltona brick pavers
Close view of older brick pavers after sealing on Deltona brick pavers
Paver driveway with one cleaned half beside a stained half on Deltona brick pavers
Contractor pressure cleaning a screened pool deck on Deltona brick pavers
Contractor spraying sealer on a paver walkway on Deltona brick pavers

What should I ask a brick paver sealing contractor?

Is the sealer made for brick?

Unilock says brick and stone absorb differently, so ask for the product and why.

What finish will it be?

Natural, wet look or matte. Ask to see a test corner.

How is the surface cleaned?

Low pressure and no wire brushes, per Unilock.

Is the old coat sound?

A peeling coat has to be stripped first at $3.50 to $5.00 per square foot per one Orlando company.

What is the minimum?

A Central Florida company sets $1,000.

Can I see insurance and a written price?

Ask before the job. The contractor standards page has the list.

Call (386) 272-6727

Questions

What do homeowners ask about brick paver sealing?

How much to clean and seal pavers?

The Central Florida range is $1.50 to $3.00 per square foot for clean, sand and seal, and an Orlando company lists brick pavers at the same $1.50 to $3.00, with typical projects of $750 to $3,000. Washing alone is lower, at $0.15 to $0.75 per square foot.

How long does paver sealing last in Florida?

An Orlando paver company says two to four years and recommends cleaning every 12 to 15 months. Unilock puts the usual reapply span at three to five years. A Florida company adds that matte finishes generally last longer than glossy ones.

Is it necessary to seal pavers in Florida?

Unilock says pavers do not need sealer to perform. Florida sun, storms and humidity still wear on bare brick, and a company that lists Deltona points to fading, lost joint sand and algae in shaded areas as the usual problems.

Is there a downside to sealing pavers?

A coat has to be renewed every few years, and a poor application can go wrong. Unilock warns of a whitish film from trapped moisture or a second coat applied before the first set, and says brick and stone absorb sealer at different rates, so the product has to suit the brick.

What do professionals use to seal pavers?

In Florida, water-based sealer is the standard according to one company, because it lets moisture escape. A solvent sealer can turn white and peel in humidity. Brick often takes a product chosen for brick, so ask what is planned and why.

Can a contractor seal brick pavers that were sealed before?

Usually, if the old coat is sound. If it is peeling or cloudy it has to come off first, which an Orlando company prices at $3.50 to $5.00 per square foot for strip and reseal, and Unilock warns that sealing over an incompatible earlier product can cause a whitish film.

Does brick paver sealing in Deltona need a certain finish?

That is your choice. Unilock describes a natural look that stays close to how the brick looks unsealed and a wet look that deepens color and may add gloss. Matte lasts longer, per a Florida company, and a penetrating matte keeps traction on steps and walks.

How should I plan brick paver sealing around Deltona weather?

Unilock asks for 50 to 90 degrees and clear skies for 24 to 48 hours. Wikipedia lists June through September as Deltona's wettest months. Sprinklers near the brick should be off, since water can leave white marks.

Bring the brick color back

Use the form or ring the number, and a local contractor gets back to you inside 1 business day, usually much sooner.

Call (386) 272-6727

Free, no obligation