
Stone that stays clean and steady by the pool
Travertine Sealing in Deltona, FL
Call (386) 272-6727 for a free estimate on sealing travertine pool decks and patios in Deltona.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals travertine in Deltona, and how soon do they answer?
A local stone and paver contractor seals travertine at homes across Deltona, FL, and a reply reaches you inside 1 business day, often the same afternoon. The estimate costs nothing and booking is your decision. To get on the calendar, call (386) 272-6727.
Travertine is natural stone full of tiny holes, so it soaks up pool splash, sunscreen and leaf stains faster than a dense concrete paver does. Sealer slows that down and keeps the warm color you picked. Picture the edge of a screened pool where water now rinses away instead of leaving a gray ring. Tell the contractor which areas get wet most, then request your free estimate.
Which nearby towns can book travertine sealing?

How is travertine different from concrete pavers around a Deltona pool?
Why does stone need its own sealer?
Concrete pavers come out of a factory dense and even. Travertine is quarried, softer and full of pores. A Florida surface company says a sealer that forms a film on top can trap moisture and look plastic on stone, so travertine takes a penetrating sealer that soaks in and lets the stone breathe. A Central Florida company says the same of limestone. To ask which product fits your stone, call (386) 272-6727.
What does sealing not do?
A stone supplier says sealer does not make stone stain proof, acid proof or maintenance free. Acid can still etch a sealed surface, so washing stays gentle. Think of the coat as a head start on stains and a slower slide toward dull, not a force field. If you want to see how the pieces fit together, request your free estimate.
Does Deltona's ground or weather change anything?
Deltona sits on the northern shore of Lake Monroe, and Wikipedia describes land with karst terrain and rolling hills. Rain falls at roughly 51 to 53 inches a year, and June through September are the wettest months. Wet weather slows drying, which matters because stone must be dry before a penetrating sealer goes on. To plan around the season, call (386) 272-6727.
Should travertine get a penetrating sealer or a film?
What is a penetrating sealer?
It soaks into the stone and leaves the surface texture as it was. A pool deck guide recommends this type for decks and calls film formers a slip risk when wet. An Orlando stone company uses a solvent based penetrating product and will not use shine sealers. Ask any bidder to name the product before you sign, and request your free estimate.
Natural look or deeper color?
Natural versions leave the color alone, while enhancing versions deepen it without adding gloss. Both keep the stone grippy. Pick natural if you like the pale, sun washed look, and enhancing if you want the veining to stand out. To compare both on a spare tile, call (386) 272-6727.
Water based or solvent based?
Water based products have lower odor and cleanup is easier. Solvent based ones soak in deeper and tend to last longer but need more ventilation, according to the pool deck guide. Either can work when it is made for travertine. The right answer depends on the deck and the weather that week, so request your free estimate.
What do chlorine, salt and sprinkler iron do to travertine in Deltona?
Pool water and sunscreen
Splash that dries on the edge leaves chlorine or salt behind, and the stone absorbs both. A pool deck guide says chlorine can stain and that sealing cuts how much soaks in. Salt pools need a sealer made to resist salt damage. Mention which kind of pool you have when you call (386) 272-6727.
Is my Deltona travertine filled or unfilled, and does it matter for sealing?
Filled travertine has its holes packed with grout or resin, while unfilled stone keeps an open, pitted face. An Orlando stone company says it fills holes with grout or color matched polyester resin. Open pits catch pollen and leaf bits, and filler that has popped out of an older deck acts like an empty hole. Point out any empty pits when you request your free estimate.
Filled travertine
Holes are packed with filler, so the face is smoother and easier to wash. Check for patches that have popped out.
Unfilled travertine
Pits stay open and hold dirt, so the wash needs more care and the stone needs a thorough dry before sealing.
Sealed over damaged fill
A coat laid over loose filler will not hold it. Repair comes first, then sealer.
What is the travertine sealing process, step by step?
Order matters on stone, and rushing any step shows up later as cloudy patches. A stone job can take part of a day or more, depending on size and drying. To set a schedule, call (386) 272-6727.
1. Look it over
The contractor checks for empty pits, loose stones, old sealer and spots where water sits.
2. Test a patch
A small hidden area gets the cleaner and the sealer first, which is standard advice from stone suppliers.
3. Wash with a stone safe cleaner
A pH neutral cleaner and a soft brush lift dirt without etching. Pressure stays low.
4. Repair joints and pits
Low joints get fresh sand and empty pits get a color matched filler.
5. Dry the stone through
Wet stone traps moisture, so the deck sits until it passes a dryness check.
6. Seal and walk the deck
A penetrating sealer goes on in even passes. The contractor explains when feet and furniture can return.
What does travertine sealing cost in Deltona?
An Orlando paver company lists natural stone and travertine sealing at $2.00 to $3.50 per square foot, a bit above the $1.50 to $3.00 it lists for standard pavers. A Central Florida company gives pool decks of pavers or travertine $1.75 to $3.00 and sets a $1,000 minimum. On a 400 square foot deck, that works out to roughly $700 to $1,400 before the minimum. For a figure written for your deck, request your free estimate.
Two things move the price: the shape of the stone and what is already on it. Empty pits, popped filler and an old film all add work, and stripping a failed coat adds $500 to $1,000 or more according to that second company. A bid that skips the wash or the drying time is a warning sign. Already have a bid? Call (386) 272-6727 and compare it.
Want to see the neighboring services? Read about pool deck paver sealing or paver stain removal, check the towns served, or go back to Deltona paver sealing.
| Job on a 400 sq ft travertine deck | Published figure | Example total |
|---|---|---|
| Wash alone (general pressure washing) | $0.15 to $0.75 per sq ft | $60 to $300 |
| Pool deck of pavers or travertine, clean and seal | $1.75 to $3.00 per sq ft | $700 to $1,200 |
| Natural stone or travertine sealing | $2.00 to $3.50 per sq ft | $800 to $1,400 |
| Strip an old coat and reseal | $3.50 to $5.00 per sq ft | $1,400 to $2,000 |
| Stripping failed sealer as an add on | $500 to $1,000 or more | $500 to $1,000+ |
The Orlando price list gives travertine its own line, $2.00 to $3.50, and the Central Florida company gives pool decks of pavers or travertine $1.75 to $3.00, both read in November 2026. The wash row is that Orlando page's general pressure washing range, not a stone price. One company sets a $1,000 minimum, so a small deck may cost more per foot than the table shows.

How often should Deltona travertine be resealed?
A pool deck guide gives 1 to 2 years for heavy use pools, 2 to 3 for higher grade products and 3 to 5 for lighter use. A Florida surface company says every 2 to 3 years, closer to 2 where salt air is heavy. An Orlando price list says maintenance cleaning every 12 to 15 months helps a coat last. Shade from a pine or an oak keeps stone damp, so a shaded patio can age differently from a sunny deck. To have a deck checked, request your free estimate.
The simplest test is water. Pour a cup on the stone, and if it soaks in and darkens instead of beading, the coat is thin. The same guide suggests an inspection each year. Try it at the pool edge first, then call (386) 272-6727.
Which stone finish keeps footing safe near the water?
Tumbled and brushed finishes grip more than honed ones, according to the pool deck guide, and honed stone is smoother and can be a slip risk when wet. A stone supplier adds that coatings can change the walking surface, so sheen is not a benefit around a pool. Say what you have, and which areas you worry about, when you request your free estimate.
Which cleaners and pressure settings are safe on travertine?
The stone is built on calcium, which is why acid eats into the surface. A Florida surface company lists vinegar and many all purpose products as risks, and Unilock names acidic cleaners as harmful to marble, limestone and travertine. The stone safe choices are a pH neutral cleaner or a high alkaline one. Ask which product the contractor plans to use, then call (386) 272-6727.
Pressure matters too. The same surface company says high pressure can pit the stone and strip joints, and a stone supplier agrees that aggressive pressure cleaning can damage stone and joints. A careful contractor keeps the wand moving at low pressure. To ask about settings, request your free estimate.
When is a good time to seal travertine in Deltona?
Choose the weather, not the month. Unilock asks for 50 to 90 degrees with 75 ideal and 24 to 48 hours of clear skies, and another sealer guide says surfaces above 90 degrees can stop sealer from working. Deltona's record high is 103 degrees, set in July 1998, so midday in summer is a poor time. Hurricane season runs June 1 to November 30, and storms push jobs back. To pick a day, call (386) 272-6727.
Check dryness before the sealer opens. A sealer guide suggests taping a plastic sheet over the stone, and if no moisture beads up underneath, the stone is dry enough. Turn the sprinklers off as well, because water that lands on fresh sealer can leave white marks. When you book, say which zones touch the deck and request your free estimate.
Can sealing repair etched or pitted travertine?
No. A Florida surface company says sealing slows future salt and moisture damage but cannot undo pitting that has already happened. An Orlando stone company says honing removes most etch marks, and holes can be filled with grout or resin first. That is restoration work, which is a separate job from sealing. If the stone is dull or marked, request your free estimate.

What does sealed stone look like around Deltona pools and lanais?








Frequently Asked Questions
How much does it cost to seal travertine pavers?
An Orlando paver company lists natural stone and travertine at $2.00 to $3.50 per square foot, and a Central Florida company puts pool decks of pavers or travertine at $1.75 to $3.00. That second company also sets a $1,000 project minimum, so a small deck can price higher per foot. A written quote should name the sealer and the cleaning method.
What is the average cost to seal pavers in Florida?
Price lists from Central Florida paver companies run $1.50 to $3.00 per square foot when concrete or brick pavers get cleaned, re-sanded and sealed. Travertine sits a little higher at $2.00 to $3.50 in one Orlando price list, because stone calls for a gentler wash and a different sealer.
Should pavers be sealed in Florida?
Many homeowners choose to. Sun, summer downpours and humidity wear on bare pavers here, and sealer slows that wear. For travertine the case is stronger near water: one Florida surface company says salt crystals in the pores can cause pitting and flaking, and sealing slows that. Sealing is still a choice, and a stone supplier points out it does not make stone stain proof.
What happens if pavers are not sealed?
Color fades faster, joint sand washes out sooner and stains soak in. Unsealed travertine also takes in pool splash and leaf tannins through its open pores. Nothing breaks overnight, so the real cost is more frequent washing and a duller look.
Is there a downside to sealing pavers?
Yes, when the wrong product goes on. Film forming sealers can turn slick and cloudy on stone, and a coat sealed over damp stone can show white spots. A penetrating product applied to dry, clean stone avoids most of that, which is why the product choice is worth asking about.
What do professionals use to seal pavers?
For concrete pavers, water based sealer is a common Central Florida choice. For travertine, stone companies reach for a penetrating sealer that soaks in and leaves no film. One Orlando stone company uses a solvent based penetrating product and avoids anything sold for extra shine.
How long does a travertine sealer last by a pool in Deltona?
A pool supplier's guide says heavy use pools may need new sealer every 1 to 2 years, higher grade products 2 to 3, and lighter use 3 to 5. A Florida surface company says closer to 2 years where salt air is heavy. Shade, splash and traffic at your own pool decide where your deck falls.
Can a Deltona contractor seal travertine in the rainy season?
Only in a dry window. Unilock asks for 24 to 48 hours of clear skies around a sealing job, and Deltona's wettest months run June through September. Stone also needs time to dry after a wash. A contractor can hold your date and move it when the forecast turns.
Will a sealer make my travertine slippery?
A penetrating sealer should not. A stone supplier warns that coatings can change the walking surface, and a pool deck guide calls film forming sealers a slip risk when wet. Ask for a penetrating product with a natural finish near the water.
Which other paver services can I book in Deltona?
Ready for a stone safe seal on your travertine?
Share your street and what the stone looks like, and expect a reply inside 1 business day, often within hours.
Free, no obligation
